The solid brass and bronze TA-10 flow control spindle provides scald protection by automatically adjusting to balance hot and cold water pressure in the same way it has since Temptrol was introduced in 1968.
Our stainless steel piston provides long-lasting, worry-free performance.
Optional integral EasyService™ stops shut water off directly at the valve while servicing without disrupting water to other units.
Hot and cold seats are easier to maintain and remove with the new universal tool.
The temperature limit stop screw allows a maximum water temperature to be set.
The options ProSafe™ test cap comes factory installed and can be used to pressure test and flush plumbing systems.
Aligned ports allow for faster installation. By placing all of the inputs on a common plane, the valve body size is reduced, allowing the valve to be installed in modular walls.
Pre-installed connectors reduce installation time on site.
By placing all of the inputs on a common plane, the valve body size is reduced, allowing the valve to be roughed in on 2x3 or modular walls.
Valves can be installed back-to-back by using a valve with a reverse seat. Simply order an “RV” modifier on your valve body or install the reverse seat yourself.
Stringer mounts are built into the valve body casting, which allows for easier installation of the valve, particularly when copper piping is not being used. These stringer mounts can also be used to mount the valve to a bracket for even faster and easier installation.
The semi-red brass casting uses a lower percentage of zinc then yellow brass, the common metal in many competitor valves. Lower zinc percentage decreases the risk of dezincification which can lead to cracks and leaks in the valve body over time.
All Symmons decorative trim are compatible with the Temptrol valve giving you complete control of the design aesthetic.
The optional Rapid Install Bracket is made of heat resistant nylon and creates a stable installation for your Temptrol valve, particularly when using none rigid supply lines. The Rapid Install Bracket eliminates the need to measure rough in depth, as the bracket sets the valve depth. Using the Rapid Install Bracket can reduce installation time by up to 67%.
Universal Tool (Removes Seats and Stops)
The new universal seat removal tool can be used to remove hot and cold seats, as well as the stops. This tool works on all Symmons Temptrol® valves.
Every Temptrol® valve is made in Symmons' Braintree, Massachusetts manufacturing facility.