The solid brass and bronze TA-10 flow control spindle provides scald protection by automatically adjusting to balance hot and cold water pressure in the same way it has since Temptrol was introduced in 1968.
Our stainless steel piston provides long-lasting, worry-free performance.
Optional integral service stops shut water off directly at the valve while servicing without disrupting water to other units.
Hot and cold seats are easier to maintain and remove with the new universal tool.
The temperature limit stop screw allows a maximum water temperature to be set.
The optional test cap comes factory-installed and can be used to pressure test and flush the plumbing system.
Aligned ports allow for faster installation. By placing all of the inputs on a common plane, the valve body size is reduced, allowing the valve to be installed in modular walls.
Pre-installed connectors reduce installation time onsite.
By placing all of the inputs on a common plane, the valve body size is reduced, allowing the valve to be roughed in on 2x3 or modular walls.
The valve is set up to rotate 360º so that the same casting can be used for back-to-back installations. Simply change the seat, and the valves go in the wall.
Stringer mounts are built into the valve body casting, which allows for easier installation of the valve, particularly when copper piping is not being used. These stringer mounts can also be used to mount the valve to a bracket for even faster and easier installation.
The semi-red brass casting uses a lower percentage of zinc than yellow brass, the common metal in many competitor valves. Higher zinc percentage increases the risk of dezincification,which can lead to cracks and leaks in the valve body over time.
No matter your style preference, Symmons shower systems of any aesthetic are all compatible with Temptrol.
The optional mounting bracket is made of heat-resistant nylon and creates a stable installation for your Symmons valve, particularly when using non-rigid supply lines. The mounting bracket eliminates the need to measure rough-in depth, as the bracket sets the valve depth. Initial tests show the bracket reduces installation time per valve by 67%.
Universal Tool (Removes Seats and Stops)
The new universal seat removal tool can be used to remove hot and cold seats, as well as the stops. This tool works on all Symmons Temptrol® valves.
Every Temptrol® valve is made in Symmons' Braintree, Massachusetts manufacturing facility.